GB
8
The auxiliary input can be used to take advantage of the
sound quality of your ULTRA SLIM audio system when
listening to other sources.
Examples: A
television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
Set the system to standby mode and disconnect it and the external
source from the main.
Connect the audio cable to the rear of the ULTRA SLIM audio system.
Connect the...
To the connector marked...
Red jack
R (right)
White jack
L (left)
For optimum sound quality, do not invert the right and left
channels.
Plug the system back into the main socket and press On/Standby
( ) to switch it on.
Select the AUX source by pressing the AUX button.
Result:
AUX
is displayed.
Switch the external source on.
1
2
3
4
5
Connecting to an External Source
You can view the various functions available on your system.
Press the Demo button.
Result: The various functions available are listed in turn on the
display.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate
sections.
To cancel this function, press Demo again.
2
1
You can adjust the brightness of the LCD display depending
on the surrounding lighting conditions
Press the Dimmer button on the remote control to adjust the brightness.
The selection switches each time the button is pressed:
Dimmer1(Bright)
➞
Dimmer2 (Medium)
➞
Dimmer3(Dim).
Viewing the Various Functions on
Your System
Adjusting the brightness of the
LCD display
SPEAKERS
(6 )
L
R
L
R
AUX IN
Timer
On/Off
P.Sound
S.Bass
EQ
+10
Demo
Dimmer
Open/Close
Display
Sleep
AUX
Timer/
Clock
PTY
RDS
Timer
On/Off
P.Sound
S.Bass
EQ
+10
Demo
Dimmer
Open/Close
Display
CD
Sleep
AUX
Timer/
Clock
PTY
Repeat
Random
RDS
Timer
On/Off
P.Sound
S.Bass
EQ
+10
Demo
Dimmer
Open/Close
Display
CD
VOL.
Band
Sleep
AUX
Timer/
Clock
Program/
PTY
Repeat
Random
RDS
EV-Z1GB-RDS 6/4/03 9:47 Page 9
