28
Manual Wireless Network Setup
(The pictures may vary depending on the models)
If the network requires a static IP address, enter the IP address, subnet mask, gateway and DNS values
to connect to the network manually. To get the IP address, subnet mask, gateway and DNS values,
contact your Internet Service Provider (ISP). Refer to the Dynamic versus Static IP Addresses for more
information.
11
Setting
Network Type
to
Wireless
automatically displays a list of available wireless networks.
Network Settings
Select your network type.
Network Type
Wireless
Wireless network
AP0000
AP0001
Add Network
You can connect your TV to the
internet. Please select which
wireless network to use.
Refresh
WPS(PBC)
21
Select the network (SSID) you wish to connect to. If the desired wireless router doesn't appear in
the list, select
Add Network
and enter the network's SSID manually.
31
Enter the security key and select
Done
. If the selected network is not security-enabled, the TV will
attempt a connection right away.
41
Select
Stop
when the TV attempts to connect to the network. Once the network connection has
been interrupted, select
IP Settings
.
Network Settings
Connection verification cancelled.
Wireless network connection test stopped.
Change Network
IP Settings
Retry
Close
