15
3. Disassembly and Reassembly
3-5 Removing Heater-Broil
WARNING
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
CAUTION
When you work on the electric range, be careful when handling the sheet metal parts . Sharp edges may
be present, and you can cut yourself if you are not careful .
Parts
Explaination Photo
Explaination
Broil
1.
Turn off the electrical supply going to the
range .
2.
Open the oven door and remove the racks
from inside the oven .
3.
To remove the broil element .
a)
Remove the Sensor-Thermistor and 4
screws from the front and rear brackets .
b) Remove Cover-Back Main Wire and
disconnect 2 wires from Heater-Broil
and a wire from Sensor-Thermistor .
