Operating the oven _
20
OPERA
TING THE OVEN
SETTING THE CLOCK
The
clock
must be set to the correct time of day for the automatic oven timing functions to work properly.
• The time of day cannot be changed during a timed cooking, a delay-timed cooking or a self-
cleaning cycle.
• You can choose between a 12-hour or 24-hour display. The default is 12-hour.
How to set the clock
1
. Start the set up. Press the
CLOCK
pad.
2
. Enter the present time.
Enter the current time in hours and minutes on the number pad,
eg. 1, 3, 0, for 1:30.
3
. Exit the set up. Press the
SET/START
or
CLOCK
pad.
How to change between a 12-hour and 24-hour display
1
. Start the set up.
Press
CLOCK
and
0
on the number pad at the same time for 3
seconds.
The display will show the present mode.
2
. Select the display mode you want.
Press
0
on the number pad to select 12 hour or 24 hour.
3
. Exit the set up.
Press the
SET/START
pad.
SETTING THE KITCHEN TIMER
The kitchen timer serves as an extra timer that will beep when the set time has elapsed. It does not
start or stop cooking functions. The feature can be used during any of the other oven functions.
How to set the timer
1
. Turn the timer on.
Press the
KITCHEN TIMER ON/OFF
pad.
2
. Enter the amount of time you want.
Enter the amount of time you want using the number pad, eg. 1,
5. The timer can be set for any amount of time from 1 minute to 9
hours and 99 minutes. If you make a mistake, press the
KITCHEN
TIMER ON/OFF
pad and start again.
3
. Start the timer.
Press the
KITCHEN TIMER ON/OFF
pad.
4
. When the set time has elapsed, the oven will beep and the display
will show End until you press the
KITCHEN TIMER ON/OFF
pad.
You can cancel the timer at any time by pressing the
KITCHEN
TIMER ON/OFF
pad.
FE-R300_XAA_DG68-00277A-09_EN.indd 20
02/01/2014 11:12:15