14
3. Disassembly and Reassembly
3-4 Removing The Latch-Door & Switch-Door Plunger
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
CAUTION
When you work on the electric range, be careful when handling the sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
Explaination Photo
Explaination
Latch-Door
& Switch-
Door
Plunger
1.
Turn off the electrical supply going to the range .
2.
Open the oven door .
3.
Raise the cooktop .
4.
To remove the Latch-Door:
a) Remove the 2 screws from the front of cavity .
b) Remove a screw from Cover-Back Main Guard
and remove latch-door
5.
To remove the Switch-Door Plunger
a)
Remove the Cover-Back Guard Wire .
(see page 10 .)
b)
Release the wire from Cable Clamp .
c)
Remove the Switch-Door Plunger from the
range . take out carefully with shaking up and
down by using tool .
