50
4. Troubleshooting
4- Electrical Malfunction
RC radiant element
(No heating or
Abnormal working)
* Disconnect power
*Check warming center relay on main PCB.
*Check whether harness in terminal(CN06)
of main PCB has been loosen or disconnected.
No
No
Ok
Ok
Ok
*Check whether PCB pattern
have a short circuit or Relay
(Ry07) has been damaged.
*Replace relay or repair PCB pattern.
*Tighten terminal of harness by
compressing not to be loosen.
Ok
*Check whether harness is connected
with cooktop has been damaged or
disconnected.
Ok
*Check RC Radiant element of cooktop.
Ok
Next page
END
Warming center relay(RY07)
Warming center relay(RY07)
Warming center relay(RY07)
CN06
CN06