Samsung FX 505, Operator'S Manual

I m p o r t a n t   S e n d i n g   F a c t s

Memory Dialing

If you have stored frequently used
numbers in the unit’s memory, and if the

remote party you are calling is set to
receive documents automatically, you can

send a document at the touch of a key or

using 

[SPEED] 

key and 2-digit number.

For information on storing numbers for
memory dialing, see “Storing One-Touch
& Speed Dial Numbers” on page 28.

T o   s e n d   d o c u m e n t   u s i n g   m e m o r y

dialing ;

1. Load the document face down into the

unit (see page 22).

2. To dial the number assigned to one-

touch key, press the one-touch key.

If fax number is not assigned, the unit

will automatically dial the telephone

n u m b e r   s t o r e d   i n   t h e   o n e - t o u c h
location.

To dial the number assigned to 2-digit

number, press [SPEED] and enter the

2-digit number (01 - 20).

3. The unit automatically dials the

number, confirms the connection and

sends the document.

The messages on the LCD window tell
you what step is being performed.

 If you press one-touch key or 2-digit
number which is not stored in the unit,
warning

tones

sound

and

[NOT

ASSIGNED] 

appears on the window.

Automatic Redialing

When you try to send a document using

memory dialing and the receiving unit is
busy or does not answer (within 60
seconds), your unit will automatically
redial the number at 3-minute intervals
until it reaches the receiving unit. It redials
the number up to three times in case of
no answer.

When you dial a number manually using
the dial keypad and the number is busy,
either press 

[START/COPY] 

and hang

up or hang then press

[ R E D I A L / P A U S E ]  

to activate the

automatic redialing.

If there is still no answer, your unit hangs

up. If the receiving unit answers, your

document is sent automatically.

The OHD indicator flickers and 

[BUSY

REDIAL?] 

appears on the LCD window

while the unit waits for the 3-minute

interval time to indicate the auto redialing
is being activated. If you want to redial

the number soon without waiting for 3

minutes, press 

[YES]. 

The unit beeps

each time it completes redialing. If you
a n s w e r  

[ N O ]  

a g a i n s t   t h e   m e s s a g e

[BUSY REDIAL?], 

the unit returns to

the standby mode.

To cancel automatic redialing at any time,

press 

[STOP] 

or remove the document.

 If you receive call while the unit waits for

the 3-minute interval time in the middle of

automatic redialing, lift the handset. You
can take the call and the automatic
redialing is cancelled.

Handset Up, Handset Down

You can use any dialing

method - manual, one-touch, or speed

dialing - for manual faxing (with the
handset up) or automatic faxing (with the

handset down).

To dial manually with the handset down,

press 

[OHD/HOLD] 

first. You will hear a

dial tone through the speaker and you
can then dial manually the telephone
number using the dial keypad.

Leave the handset down when you think
you are dialing an automatic fax machine

and don’t expect the remote operator to
answer.

If the remote operator does

answer,

a fax tone will inform the

operator that a fax is coming in.

If you do lift the handset to dial, be sure
not to hang up until the transmission
begins.

H a n g i n g   u p

before

the

transmission begins will disconnect the
line and cancel the transmission.