Connectivity
83
3
Select
WPS pin from this device
→
OK
. On the access
point, enter the PIN shown on the tablet and press the
start button.
Or, select
WPS pin from access point
, enter the PIN
shown on the access point, and press
OK
.
›
Set static IP settings
1
Open the application list and select
Settings
→
Wireless
and networks
→
Wi-Fi settings
.
2
Select an access point on the network list.
3
Select the drop-down menu next to
IP settings
.
4
Select
Static
.
5
Change the IP settings for the access point as required (IP
address, Gateway, Network prefix length, DNS).
6
Select
OK
.
Wi-Fi Direct
Learn to use the Wi-Fi Direct feature to connect two devices
via a WLAN without requiring an access point.
›
Connect your device to another device
1
Open the application list and select
Settings
→
Wireless
and networks
→
Wi-Fi Direct settings
→
OK
→
Wi-Fi
Direct
.
2
Select
→
Scan
.
3
Select a device and then select
Connect
.
When the connection is accepted on the other device, the
devices are connected.