107
Settings
Information
• "WPA2 PSK" is set by default.
• You can also scan the QR code to connect to the terminal.
• While connected via Wi-Fi tethering, on the Wi-Fi tethering screen,
→ "Configure Wi-Fi tethering" → mark "Hide my device" → tap
"SAVE" to disconnect the connected wireless LAN device.
• If "Hide my device" is marked, the terminal cannot be scanned. When you
connect from the other device, check the information displayed on the
Wi-Fi tethering screen, and then set the Wi-Fi access point manually.
• Also, on the Wi-Fi tethering screen, tap → "Timeout settings" to
turn off Wi-Fi tethering automatically when there is no connected
device for specified time.
• On the Wi-Fi tethering screen, set → "Wi-Fi sharing" to ON, you can
share the Wi-Fi connection with another equipments.
■ Setting Bluetooth tethering
You can connect up to 3 Bluetooth devices to the Internet at one time,
using the terminal as an Internet access point.
1
From the Home screen, → "Settings" → "Connections" →
"Tethering" → "Bluetooth tethering"
2
Information
• In order to use Bluetooth tethering, this terminal needs to be
detectable. For details, refer to "Enabling Bluetooth function and
making your terminal detectable" (P.132) .
■ Setting USB tethering
You can connect to the Internet by connecting the terminal to a PC via
USB cable A to C 02 (sold separately).
1
Insert Type-C plug of the USB cable A to C into the USB
Type-C connection terminal of the terminal
• For connecting method, see "Connecting with USB cable A to C"
2
Insert USB plug of the USB cable A to C into a PC USB port
3
From the Home screen, → "Settings" → "Connections" →
"Tethering" → "USB tethering"
Information
• During USB tethering, you can't look inside this terminal and microSD
card from connected PC.
• Operating environments for USB tethering are as follows. DOCOMO
is not liable for the operation after upgrading/adding/changing OS.
- Windows 8.1
- Windows 10
Summary of Contents for Galaxy A41
Page 1: ...INSTRUCTION MANUAL SC 41A...
