Basics
25
Using tools
While showing the screen on the connected display, you can write
or draw on the screen using the following tools.
Cursor mode
Pen mode
Highlighter
mode
Eraser mode
Undo/Redo
While using the pen or highlighter, select the desired icon again to
change the color or line thickness.
3
Press and hold the
Fn
key and press the
F4
key repeatedly,
then select
Extend
for project mode.
4
Select
Start
.
A frame for selecting area will appear.
Start
is activated only when the project mode is set to
Extend
.
5
Drag to select an area to show in an external display and
select
Done
.
The selected area will be shown on the external display.
To fix the ratio of the selected area to the ratio of the external
display, select and select the
Fixed ratio
switch to activate it.
To stop displaying the screen, select
Stop
.
Selected
area
