4
Samsung Galaxy Buds
PAGE
Charge the battery
(Your device case is also the charger)
1. Place the earbuds into the charging case. For best results, do not insert
earbuds in the charging case if they are wet or dirty.
2. Close the charging case, and either connect the USB cable as shown, or
place the charging case on a wireless charger. The earbuds and charging
case are charged simultaneously.
CAUTION
The charging head for plugging the USB cable into a wall outlet is not
included. Use only Samsung charging devices rated with an output voltage of
5v and an output current of over 150mA (sold separately). Samsung accessories
are designed for your device to maximize battery life. Using other accessories
may cause damage, and damage may not be covered by warranty.
While charging, the device and the charger may become hot. This does not
affect the device’s lifespan or performance and is in the device’s normal range
of operation.
Remove the device from the charger and wait for the device to cool down. For
more
NOTE
Do not disassemble, modify, or repair your device. Placing objects, such
as magnetic stripe cards, including credit cards, phone cards, passbooks, and
boarding passes, next to the device or charger may cause damage from the
charger or device’s magnetic field.
Check the charge status
When you connect the earbuds and the charger case the LED indicators flash
certain colors to indicate the battery level.
•
Green:
Fully charged or above 60% battery.
•
Yellow:
Between 30 and 60% battery.
•
Red:
Charging or below 30% battery.
•
Flashing Red:
Charging error. Reconnect the case and earbuds. If the error
occurs again, contact a Samsung Service Center for service support.
NOTE
You can check the battery level for the case and earbuds in the Galaxy
Wearable app.
Set up your device
