103
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for easy
and secure wireless network set up and connections. To use
WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic devices.
WPS allows you to push buttons instead of entering a network
name and wireless security PIN.
1.
From the Home screen, tap
➔
Settings
➔
Wireless
and network
➔
Wi-Fi settings
.
2.
Tap
WPS button connection
.
3.
Press the WPS button on your Wi-Fi access point within 2
minutes.
Mobile AP
You can use your tablet as an Internet AP (Access Point) using
Mobile AP. This allows other devices (maximum of 5) to connect
to it via Wi-Fi. The Internet will be available on connected devices
to share your 3G network.
Mobile AP settings
To set up Mobile AP, follow these steps:
1.
From the Home screen, tap
➔
Settings
➔
Wireless
and network
➔
Mobile AP
.
2.
Tap
Mobile AP
to make a checkmark and activate the
feature.
3.
Mobile AP consumes more battery power and increases
your data usage. Tap
Yes
to continue.
4.
If Wi-Fi is activated, tap
Yes
to deactivate it.
Connecting to Mobile AP from other devices.
1.
Activate Wi-Fi on the device that wants to connect to your
tablet.
2.
Find
[AndroidAP1851]
in the Wi-Fi network list and connect
to it.
The connected device can now use internet with Mobile
AP.
Note:
Activating Wi-Fi and connecting to your phone will be different
depending on the type of device.
