• If any part of the device, such as the glass or acrylic body, is broken, smokes,
or emits a burning odor, stop using the device immediately. Use the device
again only after it has been repaired at a Samsung Service Centre.
• Do not turn on or use the device when the battery compartment is exposed.
• Do not disassemble or reuse the battery.
• Do not allow children or animals to chew or suck the device.
• The device can be used in locations with an ambient temperature of 0 °C
to 35 °C. You can store the device at an ambient temperature of -20 °C to
50 °C. Using or storing the device outside of the recommended temperature
ranges may damage the device or reduce the battery’s lifespan.
• Do not use your device in a hot environment or near fire.
• Comply with all safety warnings and regulations regarding mobile device
usage while operating a vehicle.
Correct disposal
This marking on the product, accessories or literature indicates
that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other
household waste.
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste.
PO BOX 12987, DUBLIN, IE
Safety information
Read all safety information before using the device to ensure safe and proper
use. You can view more safety information in the safety information menu of
the Settings app.
Warning
Your device contains magnets, which may affect medical
devices, such as pacemakers or implantable cardioverter
defibrillators. If you are using any of these medical devices, keep
your device a safe distance from them and consult with your
physician before you use the device
Follow the warnings below to prevent incidents, such as fires or
explosions, injuries, or damage to the device
• Do not expose the device to physical impact or damage.
• Use only Samsung-approved batteries, chargers, and cables specifically
designed for your device.
• Prevent the multipurpose jack and battery terminals from coming into
contact with foreign materials such as metal, liquids, or dust.
Some content may differ from your device depending on the region, service
provider, or software version, and is subject to change without prior notice.
Copyright © 202 Samsung Electronics Co., Ltd.
FCC Notice
The device may cause TV or radio interference if
used in close
proximity to receiving equipment.
The FCC can require you to
stop using the
mobile device if such
interference cannot be eliminated
.
Information about the RF
exposure from FCC
In August 1996, the Federal Communications
Commission
(FCC) of the United States, with its
action in Report and Order
FCC 96-326, adopted
an updated safety standard for human
exposure
to radio frequency (RF) electromagnetic energy
emitted by FCC regulated transmitters. Those
guidelines are
consistent with the safety standard
previously set by both
international and U.S.
standards. The design of this phone
complies
with FCC guidelines and these international
standards.
Body effects
For body operation, this device has been tested
and meets
FCC RF exposure guidelines when
used with any accessory
that contains no metal
and which provides a minimum
separation
distance of 0
body of the user. Use of other accessories may
not ensure
compliance with FCC RF exposure
guidelines. Use of other
accessories may not
ensure compliance with FCC RF
exposure
guidelines.
Class B Compliance under article 15 of the FCC
This device
complies with Part 15 of the FCC
Rules. Operation is subject to
the condition that
this device does not cause harmful
interference.
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference,
and (2) this device must accept any
interference received,
including interference that
may cause undesired operation.
Caution
The user is cautioned that changes or
modifications not
expressly approved by the
party responsible for compliance
could void the
user's authority to operate the equipment.
FCC Notice
The device may cause TV or radio interference if
used in close
proximity to receiving equipment.
The FCC can require you to
stop using the
mobile device if such
interference cannot be eliminated
.
Information about the RF
exposure from FCC
In August 1996, the Federal Communications
Commission
(FCC) of the United States, with its
action in Report and Order
FCC 96-326, adopted
an updated safety standard for human
exposure
to radio frequency (RF) electromagnetic energy
emitted by FCC regulated transmitters. Those
guidelines are
consistent with the safety standard
previously set by both
international and U.S.
standards. The design of this phone
complies
with FCC guidelines and these international
standards.
Body effects
For body operation, this device has been tested
and meets
FCC RF exposure guidelines when
used with any accessory
that contains no metal
and which provides a minimum
separation
distance of mm between this device and the
body of the user. Use of other accessories may
not ensure
compliance with FCC RF exposure
guidelines. Use of other
accessories may not
ensure compliance with FCC RF
exposure
guidelines.
Class B Compliance under article 15 of the FCC
This device
complies with Part 15 of the FCC
Rules. Operation is subject to
the condition that
this device does not cause harmful
interference.
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference,
and (2) this device must accept any
interference received,
including interference that
may cause undesired operation.
Caution
The user is cautioned that changes or
modifications not
expressly approved by the
party responsible for compliance
could void the
user's authority to operate the equipment.
Specific Absorption Rate (SAR)
certification information
Your device conforms to U.S. Federal Communications Commission
(FCC) standards that limit human exposure to radio frequency (RF)
energy emitted by radio and telecommunications equipment. These
standards prevent the sale of mobile devices that exceed a maximum
exposure level (known as the Specific Absorption Rate, or SAR) of
1.6 W/kg.
In normal use, the actual SAR is likely to be much lower, as the device
has been designed to emit only the RF energy necessary to transmit
a signal to the nearest base station. By automatically emitting lower
levels when possible, your device reduces your overall exposure to
RF energy.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The FCC has granted an Equipment Authorization for this model
device based on the compliance of all reported SAR levels with the
FCC RF exposure guidelines. Some devices are required to receive
approval from the FCC. If your device required FCC approval, you
can view the FCC certification by opening Settings About phone
Status.
SAR information for this and other devices can be found on the FCC
website at:
www.fcc.gov/oet/ea/.
Follow the instructions on the website to use the FCC ID to find SAR
values for the device.
SAR information for this device can also be found on Samsung’s
website:
www.samsung.com/sar.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
