Changing Your Settings 107
Network Notification
By default, when Wi-Fi is on, you receive notifications in the
Status bar anytime your tablet detects an available Wi-Fi
network. You can deactivate this feature if you do not want to
receive notifications.
1.
From the Home screen, touch
➔
Settings
➔
Wireless
and network
➔
Wi-Fi settings
.
2.
Touch
Network notification
. A check mark displayed next to
the feature indicates Network notification
is active.
3.
Touch
Network notification
again to remove the check
mark and deactivate this feature.
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for easy
and secure wireless network set up and connections. To use
WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi tablets, routers, access points,
computers, adapters, and other electronic devices.
WPS allows you to push buttons instead of entering a network
name and wireless security PIN.
1.
From the Home screen, touch
➔
Settings
➔
Wireless
and network
➔
Wi-Fi settings
.
2.
Touch
WPS button connection
.
3.
Press the WPS button on your Wi-Fi access point within 2
minutes.
Mobile AP
You can use your tablet as an Internet AP (Access Point) using
Mobile AP. This allows other devices (maximum of 5) to connect
to your tablet using a Wi-Fi connection. The Internet is available
on connected devices to share your 3G network.
Mobile AP settings
Follow these steps to set up a Mobile AP connection:
1.
From the Home screen, touch
➔
Settings
➔
Wireless
and network
➔
Mobile AP
.
2.
Tap
Mobile AP
. A checkmark indicates activation.
3.
Tap
Yes
to deactivate the Mobile AP connection.
