English - 15
04
O
VEN USE
SETTING COOKING TIMES & POWER LEVELS
Your microwave allows you to set up to two different stages of
cooking, each with its own time length and power level. The
Power Level
button lets you control the heating intensity from
Warm (1) to High (10).
ONE-STAGE COOKING
For simple one-stage cooking, you only need to set a cooking time. The power level is
automatically set to High. If you want to set the power to any other level, you must set it
using the
Power Level
button.
Some recipes require different stages of cooking at different temperatures. You can
set multiple stages of cooking with your microwave.
1.
Use the
Number
buttons to set a cooking time. You can set
a time from one second to 99 minutes, 99 seconds. To set a
time over one minute, enter the seconds too.
For example,
to set 20 minutes, enter 2, 0, 0, 0.
2.
If you want to set the power level to something other than
High, press the
Power Level
button, then use the
Number
buttons to enter a power level.
Power Levels
0 = PL:0
0 % (No power)
6 = PL:60 60 % (Simmer)
1 = PL:10 10 % (Warm)
7 = PL:70 70 % (Medium
high)
2 = PL:20 20 % (Defrost)
8 = PL:80 80 % (Reheat)
3 = PL:30 30 % (Low)
9 = PL:90 90 % (Sauté)
4 = PL:40 40 % (Medium low) 10 = PL:Hi 100 % (High)
5 = PL:50 50 % (Medium)
3.
Press the
START
button to begin cooking. If you want to
change the power level, press
STOP/CANCEL
before you
press
START
, and re-enter all of the instructions.
MULTI-STAGE COOKING
1.
If you want to set the Microwave Multi-Stage, Use the
Number
buttons to set a second cooking time after follow
steps 1 and 2 in the “One-Stage Cooking” section on this
page. And Press the
Power Level
button, then use the
Number
buttons to enter a power level.
2.
If you want to set the Grill Multi-Stage, Press the
Grill
button, after follow steps 1 and 2 in the “One-Stage
Cooking” section on this page. And Use the
Number
buttons to set a second cooking time.
3.
Press
START
button to begin cooking.
When entering more than one cooking stage, the
Power Level
button must be
pressed before the second cooking stage can be entered.
You can check the Power Level while cooking is in progress by pressing the
Power
Level
button.
USING THE +30S BUTTON
You can increase the cooking time by pressing the
+30s
button once for each 30
seconds to be added.
1.
Press the
+30s
button once for each 30 seconds to be
added.
2.
Press the
START
button.
Add 30 seconds to a program in progress by pressing the
+30s
button for each 30
seconds you want to add.
GE0103MB1_XSG_DE68-03886G-01_EN.indd 15
2014-09-13 6:12:43
