SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
11-4
This Document can not be used without Samsung's authorization
①
②
1) Be careful dirt on the window.
2) Be careful not to occur any damages and scratches
on LCD.
3) Be careful not to occur any damages to components
on SUB PBA.
1) Be careful to damage to the LCD and dirts on
window during assembly
2) Assemble components on SUB PBA carefully
1) Be careful not to occur any damages to the FPCB.
2) Pay attention to handle the lines after placing the
MOTOR/RECEIVER.
1) Be careful to occur any damages and scratches on
the FPCB.
1
2
3
4
1) Put the SUB Keypad on the Slide Upper.
2) Assemble the LCD FPCB to the Sub PBA.
1) Put the LCD on the grooves at the top side of
the SLIDE UPPER.
2) Put the SUB PBA
3) Put the NUM Keypad.
1) Connect the NUM KEY FPCB to the SUB PBA
Connector.
2) Put the NUM Key keep away from the screw holes
3) Put the MOTOR/Receiver FPCB. (Line cleanup)
1) Assemble the SLIDE FPCB according to
baselines
2) Confirm the baselines.
3) Fold the bottom of FBCB's folding part to the
other side and lift it up.
①
③
