SAMSUNG Proprietary-Contents may change without notice
Level 3 Repair
8-4
This Document can not be used without Samsung's authorization
8-3. Flow Chart of Troubleshooting
※
presetting methods for checking TP
- GND & TP(exp. Vbatt=C108, C109, C212,C308) using Oscilloscope
- look over the coming out signal.
←
Oscilloscope
←
Multi-meter
←
Checking the TP(test point) using Multi-meter
- EX) to look up the TP, shunt Cap. - if checking the GND, you can listen "beep"
if checking the Signal, you can't listen it.