Eco Sensor and screen brightness
Eco Sensor adjusts the brightness of the TV automatically. This
feature measures the light in your room and optimises the
brightness of the TV automatically to reduce power consumption.
If you want to turn this off, go to >
Settings
>
General
>
Eco
Solution
>
Ambient Light Detection
.
•
The eco sensor is located at the bottom of the TV. Do not
block the sensor with any object. This can decrease picture
brightness.
Changing the TV’s password
>
Settings
>
General
>
System Manager
>
Change PIN
Run
Change PIN
and then enter the current password in the
password field. The default password is “0000” (France: “1111”).
Enter a new password and then enter it again to confirm it. The
password change is complete.
If you forgot your PIN code, press the buttons in the following
sequence to reset the PIN to “0000” (France: “1111”):
On the Samsung Smart Remote: Select
(Volume)
button. >
Volume Up
> >
Volume Down
> >
Volume Up
> .
On the standard remote control: Select button. > (Volume
Up) > Select
RETURN
button. > ( ) (Volume Down) > Select
RETURN
button. > ( ) (Volume Up) > Select
RETURN
button.
Setting the sound sensor
•
This function is
supported only in Q7
series, Q8 series, Q9
series models.
You can turn on or off the sound sensor by using its button at the
bottom of the TV.
With the TV on, you can push the button to the left (or backward)
to turn on the sound sensor or to the right (or forward) to turn
off it.
See the pop-up window on the TV to check whether the sound
sensor is turned on or off.
•
The position and shape of the sound sensor may differ
depending on the model.
•
During analysis using data from the sound sensor, the data is
not saved.
04 Specifications and Other
Information
Specifications
Display Resolution
3840 x 2160
Sound (Output)
TU7 Series, TU8 Series, Q6 Series, Q7 Series: 20 W
Q8 Series 49"-50": 40 W
Q8 Series 55"-85", Q9 Series: 60 W
Operating Temperature
10 °C to 40 °C (50 °F to 104 °F)
Operating Humidity
10 % to 80 %, non-condensing
Storage Temperature
-20 °C to 45 °C (-4 °F to 113 °F)
Storage Humidity
5 % to 95 %, non-condensing
Notes
•
This device is a Class B digital apparatus.
•
For information about the power supply, and more information
about power consumption, refer to the information on the
label attached to the product.
– On most models, the label is attached to the back of the TV.
(On some models, the label is inside the cover terminal.)
•
Typical power consumption is measured according to IEC
62087.
•
To connect a LAN cable, use a CAT 7 (*STP type) cable for the
connection.
* Shielded Twisted Pair
•
An administration fee may be charged in the following
situations:
(a) An engineer is called out at your request, but it is found
that the product has no defect (i.e., where the user manual has
not been read).
(b) You bring the unit to the Samsung service centre, but it
is found that the product has no defect (i.e., where the user
manual has not been read).
•
You will be informed of the administration fee amount before
a technician visits.
* Figures and illustrations in this User Manual are provided
for reference only and may differ from the actual product
appearance. Product design and specifications may change
without notice.
Decreasing power consumption
When you shut the TV off, it enters Standby mode. In Standby
mode, it continues to draw a small amount of power. To decrease
power consumption, unplug the power cord when you don't
intend to use the TV for a long time.
English - 6
