098
Using the Built-in Flash
If you wish to discharge the
fl
ash in a dark or backlit location, press the
fl
ash button
( ) to pop up the
fl
ash. Select a [
Flash
] mode to suit your purpose from the Flash
options screen in the Fn menu. You can adjust the
fl
ash output with the rear dial
(
) in any Exposure mode other than Auto mode. The built-in
fl
ash is optimum
from about 0.7 m to 4 m from the subject. Exposure will not be properly controlled
and vignetting may occur when used at a distance closer than 0.7 m. This distance
varies slightly depending on the lens being used and set sensitivity).
Compatibility of built-in
fl
ash and lens
Vignetting (darkening of the corners of the image due to a lack of light) may occur
depending on the lens being used and the capture conditions. We recommend taking
a test shot to con
fi
rm this.
●
When using the built-in
fl
ash, remove the lens hood before shooting.
●
The built-in
fl
ash fully discharges for lenses without a function to set
aperture lens ring to
A
(Auto).
Auto
Discharges the
fl
ash automatically in dark or backlit locations.
Fill-In
The built-in
fl
ash discharges manually. When the pop-up
fl
ash is closed, the
fl
ash doesn’t discharge. When the
fl
ash is
opened, the
fl
ash will discharge.
Auto +Red-eye
Lights a red-eye reduction light before automatic
fl
ash.
Fill-In +
Red-eye
The built-in
fl
ash discharges manually. Lights a red-eye
reduction light before manual
fl
ash.
1st Curtain Sync.
Sets the shutter speed to capture the background clearly.
1st C
Red-eye
The lights a red-eye reduction light before automatic
fl
ash.
2nd Curtain Sync.
Discharges
fl
ash immediately before closing the shutter curtain.
Wireless Mode
Controls external
fl
ash(SEF-54PZF or SEF-36PZF) through
wireless connection and
fi
res the built-in
fl
ash as master. (or the
controller.)
Selecting Flash Mode
1.
Press the
Fn
button.
- The Fn menu appears.
2.
Press the direction button (
▼
) on your
camera.
- The
fl
ash options screen appears.
3.
Press the direction buttons (
◄►
) to select
[
FLASH
] mode.
- Pressing the green button ( ) resets the
exposure value if you have made the
exposure compensation to the
fl
ash.
4.
Press the
OK
button twice.
- The camera returns to a capture mode.
: Exit
: Move
: Set
Fill-In
FLASH
: Set
Fill-In + Red-eye
FLASH
Summary of Contents for GX-20 - Digital Camera SLR
