Settings
System
Network settings
Before you begin, contact your ISP (Internet Service Provider) to find out if your IP address is static. If it
is dynamic and you have a wired network, we recommend using the Automatic configuration procedures
described below.
Connect the STB to your router using a LAN cable before you start the configuration procedure.
To begin configuring your network connection, follow these steps:
Automatic
1.
Press the
MENU
button on the remote control.
2.
Select
[Settings]
>
[System]
, and then press the
▶
button.
3.
Select
[Network settings]
, and then press the
▶
button.
4.
Select
[Auto]
in the Network Settings screen.
5.
Select
[OK]
, and then press the
"
button. The STB detects the wired connection, verifies the network
connection and then connects to the network.
Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network
Settings parameters manually.
1.
Select
[Manual]
in the Network Settings screen.
2.
Enter IP address, Mask, Gateway and DNSs manually.
\
You can get the Network parameters from your Internet provider.
3.
Select
[OK]
to save settings, and then press the
"
button.
50
Summary of Contents for GX-SM660SM
Page 88: ...Memo ...
