Using the Computer 29
Step 3. Enable S/PDIF output on the DVD program
To use 5.1 channel speakers, you need to install the CyberLink Power DVD program
from the CyberLink DVD Solution Installation CD(or System software Media)
provided with your computer, then change the settings as per the following.
The CyberLink PowerDVD program is optional and may not be provided depending
on the model.
1.
Run CyberLink Power DVD program and click the
Configuration
icon (
).
2.
On the
Audio
tab, set the Audio Output setting to “Use SPDIF” and click
OK
.
Now, you can enjoy home theater using DVD titles.
To control volume for your 5.1 channel speaker, use the control on the digital
amp. (Please refer to the speaker manual.)
