Pg 11
JBL MP350 Classic Owner's Manual EN
Menu
To access the setting menu, press the MENU button
on the remote control.
To navigate the menu use the navigation buttons on the remote control.
Menu Tree
Output Type
Selects which output to use, Analog or Digital with full or partial MQA decoding
(where MQA encoded content is being played). Default is
Analog.
Output Volume
Selects whether the audio output volume is fixed or variable. Default is
Variable
.
Display
Select Display Brightness. Default is
Full
.
Auto Standby
When enabled, the streamer will enter standby after 20 minutes with no user
interaction or playback. Default is
On
.
DAC Filter
Select a digital filter for the analog outputs. Default is
Slow
.
System Reset
Press Select/OK to initiate a reset of all settings to default.
USB Update
Press Select/OK to initiate a software update from a USB stick present in the USB
socket on the rear panel.
NET Version
Displays the current software version in operation on the NETWORK device.
Host Version
Displays the current software version in operation on the HOST device.
IP Address
Displays the current IP address of the MP350 on your network.
MAC Address
Displays the MAC address of the MP350.
UNIT ID
Displays the NETWORK ID of the MP350 as identified to other devices on the
network.
Supported File Formats
File Type
Bit Depths
Sample Rates
AAC
16 or 24 bit
44.1, 48, 88.2 or 96 kHz
AIFF
16 or 24 bit
44.1, 48, 88.2, 96, 176.4 or 192 kHz
ALAC
16 or 24 bit
44.1, 48, 88.2, 96, 176.4 or 192 kHz
FLAC
16 or 24 bit
44.1, 48, 88.2, 96, 176.4 or 192 kHz
MP3
16 bit
44.1 or 48 kHz
OGG
16 bit
44.1 or 48 kHz
WAV
16 or 24 bit
44.1, 48, 88.2, 96, 176.4 or 192 kHz
WMA
16 bit
44.1 or 48 kHz
