ENG - 16
05 CONNECTING AN EXTERNAL DEVICE
Connect to an external device via a wired or wireless network to play the external device’s sound
through the Soundbar.
Connecting using an HDMI Cable (Capable of Dolby Atmos decoding
and playback)
•
When you use Dolby Atmos®
:
If the input source is Dolby Atmos®, 3.1.2 channels are outputted.
When Dolby Atmos® is active, the Soundbar’s sound effect modes controlled by the
SOUND MODE
button are not available.
•
Important
: This product supports Dolby Atmos® only in HDMI mode.
HDMI OUT
HDMI IN
(ARC)
HDMI Cable
HDMI Cable
Bottom of the Soundbar
HDMI
External Device
Right Side of the Soundbar
1.
Connect an HDMI cable from the
HDMI IN
jack on the back of the product to the HDMI OUT jack on
your digital device.
2.
Connect an HDMI cable from the
HDMI OUT (TV-ARC)
jack on the back of the product to the HDMI
IN jack on your TV.
3.
Press the
(Source)
button on the right side panel or on the remote control, and then select
“
HDMI
”.
4.
“
HDMI
” mode is displayed on the Soundbar display panel and sound plays.
NOTE
•
When Dolby Atmos® is activated, “
DOLBY ATMOS
” appears in the front display.