ENG - 17
Configuring Dolby Atmos® on your BD player or other device.
•
Open the audio output options on the settings menu of your BD player or other device and make
sure that “No Encoding” is selected for Bitstream. For example, on a Samsung BD Player, go to
Home Menu → Sound → Digital Output and then select Bitstream (unprocessed).
•
If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off.
•
Make sure that the content supports Dolby Atmos®.
Connecting using an HDMI Cable
HDMI OUT
HDMI IN
(ARC)
HDMI Cable
HDMI Cable
Bottom of the Soundbar
HDMI
External Device
Right Side of the Soundbar
1.
Connect an HDMI cable from the
HDMI IN
jack on the back of the product to the HDMI OUT jack on
your digital device.
2.
Connect an HDMI cable from the
HDMI OUT (TV-ARC)
jack on the back of the product to the HDMI
IN jack on your TV.
3.
Press the
(Source)
button on the right side panel or on the remote control, and then select
“
HDMI
”.
4.
“
HDMI
” mode is displayed on the Soundbar display panel and sound plays.