background image

I

N S TA L L AT I O N

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR.

1

Locate the A/V output jacks on the camcorder. They are
usually found on the side or rear of the camcorder.

2

Connect a set of audio cables between the “AV 3 (L, R)”
jacks on the TV and the AUDIO OUT jacks on the camcorder.

If you have mono camcorder, connect L(mono) to
camcorder audio out using only one audio cable.

3

Connect a video cable between the “AV 3 (VIDEO)” 
(or “S-VIDEO2 INPUT”) jack on the TV and the VIDEO OUT
jacks on the camcorder.

The audio-video cables shown here are usually included
with a Camcorder. (If not, check your local electronics
store.) If your camcorder is stereo, you need to connect a
set of two cables.

Connecting to the Digital Audio Input

The rear panel jacks on your TV make it easy to connect a device with digital audio output.
After making a connection, set the audio input by reference to page 51.

Connect a audio (or optical) cable between the
“COAXIAL IN” (or “OPTICAL IN”) jack on the TV
and the AUDIO OUT jack on a device with digital
audio output.

BP68-00342A-00Eng_TV  4/6/04  3:02 PM  Page 18

Summary of Contents for HC-P4363W









Reviews: