2
C
HAPTER
T
WO
: I
NSTALLATION
2
.10
Connecting to DVI (Digital Visual Interface)(480p, 720p, 1080i)
By inputting a high-bandwidth Digital Content Protection high-definition picture source
to the DVI INPUT jack on the TV, high-definition pictures can be displayed on the
screen in their digital form. (This DVI INPUT jack is for use in the future when
High-bandwidth Digital Content Protection DTV decoder, DVD players and D-VHS are
put on the market.)
1
Connect a set of audio cables between
the DTV Set-Top Box audio in jacks on
the TV and the AUDIO OUT jacks on the
DTV Set-Top box.
2
Connect a set of audio cables between
the AUDIO INPUT jacks on the TV and
the AUDIO OUT jacks on the Set Top
Box.
3
Connect a DVI cable between
the DVI INPUT jack on the TV and the
DVI OUT jack on the Set Top Box.
Note: For an explanation of
Component video, see your
DTV Set-top box’s owner’s instruction.
I
N S TA L L AT I O N
Notes
• The DVI INPUT jack can only be use with 480p, 720p, and 1080i picture signals.
Set the DTV decoder DVI OUTPUT jack output setting to 480p, 720p or 1080i.
For detailed information, refer to the Set Top Box instruction manual.
• The DVI INPUT jack is not compatible with the picture signal of a personal computer.
• Use a DVI 25-pin cable (commercially available) in order to digitally connect the TV with a
DTV decoder.
00054A-02-CHAPTER 2 2004/10/19 01:01 PM Page 10
Summary of Contents for HCN436W
Page 70: ...A 2 APPENDIX MEMO ...
Page 71: ...APPENDIX A 3 MEMO ...
