80
S
P E C I A L
F
E AT U R E S
Customizing Your Remote Control
Your TV comes equipped with a “universal” remote control. In addition to
controlling the TV, the universal remote can also operate most VCRs, DVDs and cable
boxes (even if your VCR, Cable box or DVD are made by manufacturers other than
Samsung).
Setting Up Your Remote Control to Operate Your VCR
(Cable box, DVD player)
1
Turn off your VCR. (or
Cable box, DVD player)
2
Press the
MODE
button to select
VCR
. (VCR mode is displayed on
LED screen).
3
Press the
SET
button on your TV's remote control.
▼
The remote control has four
“modes”: “TV,” “VCR”, “Cable”,
“DVD”.
Press the “MODE” button to switch
the remote control to the “VCR”
(or DVD, CATV) mode.
▼
4
Enter 3 digits of the VCR (or Cable box or DVD) code listed on
page 82 for your brand of VCR (or Cable box or DVD).
Make sure you enter 3 digits of
the code, even if the first digit is a
“0.”
If more than one code listed, try the
first one.
▼
5
Press the
POWER
button on the remote control. Your VCR (or Cable
box or DVD) should turn on. If your VCR (or Cable box or DVD) turns
on, your remote control is now set correctly.
If your VCR (or Cable box,
DVD) does not turn on, repeat
steps 2, 3, and 4, but try one of
the other codes listed for the
brand of your particular VCR (or
Cable box, DVD). If no other
codes are listed, try each code,
000 through 089.
▼
6
Once your remote control is set up, press the
MODE
button any
time you want to use the remote to operate your VCR (or Cable
box or DVD).
When your remote control is
in the “VCR” (or CATV or DVD)
mode, the volume buttons still
control your TV’s volume.
When your remote is in the “TV”
mode, the VCR control buttons
(PLAY, PAUSE, etc.) will still oper-
ate your VCR.
00137A-CHAPTER 4 2004/10/18 05:32 PM Page 80
