25
English
The Hotel Option Data of HD450S
No
Hotel TV Function
Description
Category
Item
initial value
1
Hospitality Mode
Hospitality Mode
Standalone
Select Hospitality Mode.
y
Interactive mode: TV works with an SI STB or SBB.
y
Standalone mode: TV works alone, without an SI STB or SBB.
2
Power On
Power On Channel
Last Saved
Set the default values that will be applied when the TV is turned on.
y
User Defined : Lets you set Power On Channel and Channel Type
manually. See Power On Channel and Channel Type below.
y
Last Saved : If you select this item, when the TV is turned on, it
displays the channel it was displaying when it was turned off.
Power On Channel Num
…
When the TV is turned on, it switches automatically to this channel.
Power On Channel Type
…
y
Select channel band : AIR (analog air band), DTV (digital air band),
CATV (analog cable band), CDTV (digital cable band)
Power On Volume
Last Saved
y
User Defined : Lets you set the Power On Volume manually. See
Power On Volume below.
y
Last Saved : When the TV is turned on, it returns to the volume that
had been set when the power had been turned off.
Power On Volume Num
…
The TV turns on with this Volume Level in Stand Alone Hospitality
mode.
Min Volume
0
The minimum Volume Level the user can set in Stand Alone Hospitality
mode.
Max Volume
100
The maximum Volume Level the user can set in Stand Alone
Hospitality mode.
Power On Source
TV
Select the input source the TV displays when turns on.
Power On Option
Last Option
Determines the TV's state when power returns after a power failure or
after you have unplugged the TV and then plugged it in again.
y
LAST OPTION : Returns to its last Power state. If it was in Stand-by,
it returns to Stand-by. If it was on, it turns on.
y
Power On : When the power returns, the TV turns on.
y
Standby : When the power returns, the TV enters the Standby mode.
3
Channel
Channel Setup
…
Gives you direct, immediate access to some of the Channel menu
functions on the user Channel menu such as Auto Program, Antenna
selection, etc.
Channel Editor
…
The Channel Editor lets you edit the channels stored in the TV's
memory. Using Channel Editor you can:
y
Change the channel numbers and names, and sort the channels in
your desired channel number order.
y
Apply the video mute to channels you select. The video mute blanks
out the video from a channel and outputs only the sound while
displaying a speaker icon on the screen. The Channel Editor also lets
you view information about each channel easily, without your having
to display each channel directly.
Dynamic SI
OFF
y
On : Check the DTV Programme channel number. (the DTV channel
editor is inaccessible)
y
Off: Do not check the DTV Programme channel number. (the DTV
channel editor is accessible, but additional channel Programme
number update is not supported)
Channel Rescan
Message
ON
When there is a mismatch between the data in the channel map and
the transmitted data , the TV autotunes the channels to restore the
data/parameters in the channel map.
y
On: When Channel Rescan Message is ON, The OSD showing that
the channels are being rescanned will be displayed to Hotel Guests.
y
Off: A Hotel Admin can turn the Channel Rescan Message OFF, if the
rescan message OSD should not to be displayed to Hotel Guests.
Pan Euro MHEG
OFF
y
Off: If Pan EURO MHEG is set to Off, MHEG runs according to the
existing product specifications.
y
ON: If Pan EURO MHEG is set to On, MHEG is ON regardless of the
product specifications or region.
TTX Widescreen Mode
OFF
y
On: TTX information widescreen display.
y
Off: TTX information normally display.
