31
English
Plug & Play
The Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture
mode Setup when the TV starts for the first time.
– Hotel Plug & Play is only available when the power is turned ON for the first time.
– After setting up the TV first and running Clone TV to USB.
– Next, the TV only needs to exit Hotel Plug & Play, connect to the USB device, then run Clone USB to TV.
When pressing OK button, the
hotel menu appears as shown
on the left. Complete the hotel
menu settings, and then reset
the TV. You can use your TV.
To receive channels, configure the options
below then select Scan.
Select the
connected aerial
that you want to use
to get channels.
Auto Tuning
Aerial
Terrestrial
Channel Type Digital & Analogue
Scan
Auto Tuning Complete.
Auto Tuning
Digital
TV
Radio
Data/Other
Analogue
0
0
0
0
Change Settings
Scan Again
0
Clock
Clock Mode
Date
Time
Time Zone
DST
Auto
--/--/----
--:--
Auto
Off
--:--
You can adjust your time to set DST, Time
Zone and clock mode
Set current date and time
Select your information in the
categories below.
Configure your TV
Country
Picture Mode
Bulgaria
Standard
Select the country that
you're in now
Easy Set up
Interactive
(Hotel Menu)
Standalone Setup
(Continue Setup)
Standalone Only
(End Setup)
If you select this, the
setup process will be
completed and go to
hotel menu
c
Hospitality Mode
Standalone
SI Vendor
OFF
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
System
Hospitality Mode
SI Vendor
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
HP Management
Eco Solution
Logo/Message
Cloning
REACH Solution
Standalone
OFF
System
Security
Local Set
Change Local Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : EU
Change
Skip
Select your language to start the on screen setup.
English
Eesti
Suomi
Français
Deutsch
Select your Language
Press the arrow
buttons to move
around the screen.
Press the enter button
to select.
The Language Setting will be applied to Main Menu and not Plug and Play.
TV Setup Complete!
Your TV is now ready to use.
Ok
Standalone mode is set
TV will enter the RF mode
If Standalone
Setup is selected
<Depending on Region, this step may not exist.>
After selecting the country in the country menu,
some models may proceed with an additional
option to setup the pin number.
If you forget the PIN code, in the Hotel menu,
select the
System
→
TV
Reset
. And set the pin
code again in the Plug & Play.
If Standalone
Only is selected
If Skip is selected
* It may differ depending
on the model.
* It may differ depending
on the model.
