37
English
1. LocalSet
– Check the
Current Localset
.
– If you want to change the localset, select the
Change
.
– If you select the
Skip
, the
Start
screen appears.
2. Start - Easy Set Up
– If you select the
Standalone Only
, the Standalone hotel mode is set by default.
– When you select the
Interactive
, Interactive Setup Menu is displayed. Press the power off button to exit from the
Interactive menu.
– Select the
Standalone Plug & Play
to go next step.
3. Select the Language
– Select the OSD (On Screen Display) language.
– Display time: The OSD timeouts and operations are the same as all of Samsung's consumer TV models.
4. Select the Country and Picture Mode
– Select the appropriate country and picture mode.
– Depending on model and region, some country may not exist.
5. Auto Tuning
– Select the antenna source and channel type. Configure the settings and select the
Scan
.
– The
Auto Tuning
operation starts searching for channels
– When the
Auto Tuning
operation is completed, the channel information is displayed.
6. Clock
– Set the right time by setting the
DST
(Daylight Savings Time) and
Time Zone
.
7. TV Setup Complete
EU_Install Guide_ENG.indd 37
2014-04-14 10:22:43
