7
English
Assembling the swivel
]
WARNING:
To assemble the swivel, this apparatus must be securely attached to the floor/table in accordance with the
installation instructions.
The TV stand more than 32inch supports the swivel function. The swivel angle support all of 20°, 60° and 90° and you can
change the swivel angle by using BRACKET HOLDER SWIVEL.
Support the swivel models : HG32AB670, HG40AB670, HG46AB670
¦
20° ~ 60° swivel
If you assemble the wedge on the bottom of the stand to the hole of BRACKET HOLDER SWIVEL where 20° or 60° is marked,
the swivel angle becomes each 20° ~ 60° in the left and right side.
¦
90° swivel
If you assemble only screws after you remove BRACKET HOLDER SWIVEL, the swivel angle becomes each 90° in the left and
right side.
20°
20°
60°
60°
