24
English
Menu
Item
initial Value
Description
Widget
Widget Mode
ON
Widget Mode ON/OFF.
Solution Type
Vender Server Select type of solution (Vender Server/ SINC Server).
Server URL Setting
Set server URL.
License Server IP
Setting
Set server IP.
IPTV Mode
...
IPTV mode On/Off.
Virtual Standby
OFF
Virtual Standby mode On/Off.
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W (Depending
on ithe size of the TV screen).
External Source
Browser
ON
Source Menu On/Off.
Service
CAS
Pro:idiom
Configures CAS support. Applies to only the NB673, NB677, and NB678 models.
OFF : Turns off CAS support.
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
Pro:idiom : Select to turn on Pro:Idim CAS support only.
LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS.
PI AES Data
0xD27B
Displays the current state of Pro:Idion AES
Self Diagnosis
for TV
Lets you check the state of the TV picture and sound.
y
Picture Test : Use to check for picture problems. If the problem appears in the test
picture, select YES, and then follow the directions on the screen
y
Sound Test : Use to check for sound problems. If the problem occurs during the
test, select YES, and then follow the directions on the screen
Self Diagnosis for
HTV
Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB.
If you have any problems with the Pro:idiom encryption channel or the communications
with the SI STB or SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key
Loss appears to have failed and the Pro:Idim encryption channel has failed to play
content, first check the broadcasting systems related to Pro:Idiom encryption. If your
broadcasting system does not have a problem, contact Samsung Service. If STB SI
Vendor Setting appears to have failed and communication with the SI STB or SBB has
failed, first check your SI STB or SBB. If your SI STB or SBB does not have a problem,
contact to Samsung Service.
PI AES Log
OFF
Displays the state of Pro:Idiom AES operation.
View PI AES Log
...
Display/Save Pro:idiom AES log.
SW UPGRADE
Lets you upgrade the TV SW with a USB memory stick. Refer to page 33~34.
Service Pattern
OFF
Lets you check the state of the TV picture by displaying picture test patterns. Press the
Menu button turn off the test patterns and exit.
ATV Cable
AGC Gain
Default
Lets you control the AGC gain of the analog cable channels. Don't change the default
value unless problems occur.
DTV Open Cable
AGC Gain
Default
Lets you control the AGC gain of the digital cable channels. Don't change the default
value unless problems occur.
TV Reset
Returns all settings on the TV to their factory defaults.
✎
REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you
deliver TV firmware updates, cloning data, channel maping changes, S-LYNK REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are avalible only in standalone
mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server
product for more operating information.
[HG690_ZA]Install_Guide_00ENG.indd 24
2013-03-20 9:02:10
