26
English
Menu
Item
initial Value
Description
DRM
DRM Mode
OFF
477 / 478
:pro:idiom
Configures CAS support.
OFF: Turns off CAS support.
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
Pro:idiom
: Select to turn on Pro:Idim CAS support only. (only for 477/478 and above
models)
LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS. (only
for 477/478 and above models)
PI AES Data
0x0000
Displays the current state of Pro:idiom AES. (only for 477/478 and above models)
PI AES Log
OFF
PI AES Log consists of Pro:idiom AES diagnostic register, here after referred as AESD,
values. These register log will help us diagnose PI key loss issue in the field and provide
solution for it. (only for 477/478 and above models)
View PI AES Log
…
Displays Pro:idiom AES Log OSD (only for 477/478 and above models)
System
Self Diagnosisfor TV
Lets you check the state of the TV picture and sound.
y
Picture Test
: Use to check for picture problems. If the problem appears in the test
picture, select YES, and then follow the directions on the screen.
y
Sound Test
: Use to check for sound problems. If the problem occurs during the test,
select YES, and then follow the directions on the screen.
Self Diagnosis for
HTV
Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If
you have any problems with the Pro:idiom encryption channel or the communications
with the SI STB or SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key
Loss appears to have failed and the Pro:Idim encryption channel has failed to play
content, first check the broadcasting systems related to Pro:Idiom encryption. If your
broadcasting system does not have a problem, contact Samsung Service. If STB SI
Vendor Setting appears to have failed and communication with the SI STB or SBB has
failed, first check your SI STB or SBB. If your SI STB or SBB does not have a problem,
contact to Samsung Service.
SW Update
Lets you upgrade the TV SW with a USB memory stick. See Page 36
.
Service Pattern
OFF
Lets you check the state of the TV picture by displaying picture test patterns. Press the
Menu button to turn off the test patterns and exit.
ATV Cable AGC Gain
Default
Lets you control the AGC gain of the analog cable channels. Don't change the default
value unless problems occur.
DTV OpenCable AGC
Gain
Default
Lets you control the AGC gain of the digital cable channels. Don't change the default
value unless problems occur.
Sound Bar Out
OFF
y
ON
: TV speaker sound will be mute. Sound will come out through HDMI. You must
connect the Sound Bar to hear the sound.
y
OFF: Sound will come out through TV speakers normally.
Contact Samsung
Samsung Contact information
Standby LED
ON
y
ON
: The LED light in fuction will be in red light.
y
OFF
: The LED light in fuction will be light off.
TV Reset
Returns all settings on the TV to their factory defaults.
✎
REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER
contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available
only in stand-alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with
the REACH server product for more operating information.
✎
Security Mode highlight after input password.
Security Mode off, HDMI/USB/TTX function response will back to enable status.
Security Mode On, HMDI/USB/TTX function response will according which setting value.
When change setting value of Mix Channel Map and Dynamic SI, Must do power off/on, then can go to channel Editor
confirm channel status.
