Hotel Option menu Item
Description
HMS
HMS Mode
You can turn on or off the
HMS Mode
. When set to on, the TV can operate with the
HMS server through the IP network.
HMS Server URL Setting
You can enter the HMS server's address. (Example: http://192.168.1.2:8080
)
HMS Gateway Role
When there is one TV per room, set to
Master
.
When there are more than one TVs per room, set the main TV to
Master
and the
others to
Slave
.
HMS HalfTicker Display
Set to on if you want to use the
HalfTicker UI
.
When set to off, the
HalfTicker UI will not be displayed. However, all the hot keys
(except for room control key) on the HMS remote control will work normally without
the
HalfTicker UI Display
.
H.Browser
Solution
H.Browser Mode
You can turn on or off the
H.Browser Mode
and run the
H.Browser Web App
.
H.Browser Vendor
You can select the
H.Browser Vendor
.
•
This function is enable only When
H.Browser Mode
is
ON
.
URL Launcher Setting
H.Browser Solution
settings menu
•
Install Web App
: Enter the
H.Browser server URL where Web App and sssp_config.
xml files are located.
•
Uninstall
: You can delete the installed Web App.
•
Timeout setting
: Set the timeout period for connecting to the URL.
•
Developer Mode
: If you used
Tizen Studio (SDK)
for development, you can connect
to the Host PC (which SDK is installed) to use the development tool.
Virtual
Standby
Virtual Standby Mode
When the AC power cord is plugged in and the power is off, this option maintains the
TV's important features even after the screen is off.
•
Electricity consumption may vary depending on the environment.
Reboot Time
After the TV power is off (in
Virtual Standby Mode
) if there is no input from the user
within the set
Reboot Time
, the TV will reboot and enter
Virtual Standby Mode
again.
Room Number
You can set the room number of the TV's location.
•
Refer to the manual of each solution for details about functions and settings of the solutions such as
REACH
,
HMS
,
and
H.Browser
.
• REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes,
REACH
contents, and
TICKER
contents
through RF cable to several hundred hospitality TVs simultaneously. The
REACH
functions are available only in
Standalone
mode. The
REACH Server
is sold separately. Refer to the
REACH Server
manual enclosed with the
REACH Server
product for more operating information.
English - 41
