08 Setting the Hotel Option menu
To access the
Hotel Option
menu, press the following buttons on the remote control:
1.
Press the
button.
2.
Press the up directional button.
3.
Press the down directional button.
4.
Press the
Select
button.
To control the TV functions in the
Hotel Option
menu, the TV has the
Standalone
mode.
•
SI Vendor
:
OFF
/
Movielink
/
Swisscom
/
SSCP
After a menu appears, follow these general directions to navigate and change values:
•
Use the directional buttons on the remote control to move from menu item to menu item.
•
Press the
Select
button on the remote control to select a menu item. The screen displays that menu item only.
•
Press the left or right directional button to change a value. The right directional button increases numerical values.
The left arrow button decreases numerical values.
•
When the screen is displaying one menu item, you can press the up or down directional button to display the next
or previous menu item.
•
Press the
button to exit the current menu item and go to a higher menu level.
•
To exit a
Hotel Option
menu, turn off the TV, and then turn it on again. Any changes you made are saved except
changes to SI (System Integration) vendor. For changes to SI vendor, you must turn the TV off, wait until the power
indicator at the bottom of the TV glows steadily. And then unplug the TV's power cord, wait for the power indicator
to go off, and then plug the TV's power cord in again.
English - 28
