Connecting the “CI or CI+ Card” via COMMON INTERFACE slot
Connect the “CI or CI+ Card” to the COMMON INTERFACE slot as shown in the image below.
Using the “CI or CI+ Card”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
•
Samsung TV follow up CI+ 1.4 standard. When TV product display the pop-up message, it may happen due to CI+ 1.4
Version inconsistency. If you have a problem, please contact Samsung Call Centre.
–
Your Samsung TV conforms to the CI+ 1.4 standards.
– Where a CI+ Common Interface module is incompatible with this device then please remove the module and
contact the CI+ operator for assistance.
• If you don’t insert the “CI or CI+ CARD”, some channels will display the pop-up message.
•
The pairing information will be displayed in about 2-3 minutes. If an error message is displayed, please contact your
service provider.
•
When the configuration of channel information has finished, the message “Updating Completed” is displayed,
indicating the channel list is updated.
–
You must obtain a “CI or CI+ CARD” from a local cable service provider.
–
When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may
cause damage to it.
–
Insert the “CI or CI+ CARD” in the direction marked on the card.
– The location of the COMMON INTERFACE slot may be different depending on the model.
–
“CI or CI+ CARD” is not supported in some countries and regions; check with your authorised dealer.
– If you have any problems, please contact a service provider.
–
Insert the "CI or CI+ CARD" that supports the current aerial settings. If not, the screen may not look normal.
English - 30
