08 Using a Multi Code Remocon
A Multi Code Remocon is a special remote which is designed to control multiple TVs. This function is useful
where there is more than one TV in a location.
You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID
numbers are displayed on each TV's OSD.
The Initial ID code for each TV is
0
.
• You can set and reset the ID code in analog TV mode or PC mode. (Not available in DTV mode.)
• You can set the ID code to any digit from
0
to
9
.
• To set a TV's ID code, follow these steps:
1.
Aim the remote at the TV, and then press the
MUTE
button and the
RETURN
button simultaneously for more than
7 seconds. When you stop pressing the buttons, the TV displays the current ID in the middle of the screen and a
message appears.
2.
Press the number on the remote you want to assign to the TV. The TV displays a message.
3.
After you see the message, if you press
1
, the TV and Remote will be set to ID code
1
.
–
The TV can then only be controlled by a remote which has the same ID code
1
.
–
To reset the ID code, press the
MUTE
button and the
EXIT
button simultaneously for more than 7 seconds. When you
stop pressing the buttons, the ID codes of the TV and Remote are reset to
0
.
English - 42
