Hotel Option menu items
To enter this menu, press the
MUTE
>
1
>
1
>
9
>
Select
E
buttons on the remote control in order.
To exit from this menu, turn off (or turn off and unplug the power cable if you have changed SI vendor) the TV, and then
turn on again. Any changes you made are saved.
•
The menu items may not be supported depending on the models and SI vendor.
Hotel Option menu Item
Description
Hospitality Mode
Select
Hospitality Mode
.
•
Interactive
: TV works with an SI STB or SBB.
•
Standalone
: TV works alone, without an SI STB or SBB.
SI Vendor
•
Interactive
: Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /
SeaChange / MDC / Innvue
•
Standalone
: OFF / Smoovie / SSCP
Power On
Power On Channel
Set the channel to display when the TV is turned on.
•
User Defined
: Lets you set the channel number manually. See
Power On Channel
Num
or
Power On Channel Type
below.
•
Last Saved
: If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel Num
When the TV is turned on, it switches automatically to this channel.
Power On Channel Type
Select the type of the channel will be displayed when the TV is turned on.
ATV
(analog air band),
DTV
(digital air band),
CATV
(analog cable band),
CDTV
(digital
cable band),
IPTV
(IP channels).
Power On Volume
•
User Defined
: Lets you set volume level manually.
•
Last Saved
: When the TV is turned on, it returns to the volume that had been set
when the power had been turned off.
Power On Volume Num
The TV turns on with set volume level in
Standalone
mode.
Min Volume
The minimum volume level the user can set in
Standalone
mode.
Max Voume
The maximum volume level the user can set in
Standalone
mode.
Power On Source
Select the input source to display when the TV is turned on.
Power On Option
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
•
Last Option
: Returns to its last power state. If it was in standby mode, it returns to
standby mode. If it was on, it turns on.
•
Power ON
: When the power returns, the TV turns on.
•
Standby
: When the power returns, the TV enters the standby mode.
English - 29