Hotel Option menu items
To exit from this menu, turn off (or turn off and unplug the power cable if you have changed SI vendor) the TV, and then
turn on again. Any changes you made are saved.
•
The menu items may not be supported depending on the model or geographical area.
Hotel Option menu Item
Description
Hospitality Mode
Select
Hospitality Mode
.
•
Interactive
: TV works with an SI STB or SBB.
•
Standalone
: TV works alone, without an SI STB or SBB.
SI Vendor
•
Interactive
:
Samsung / 2M / Locatel / VDA / VDA-S / Acentic / Sustinere /
Quadriga / ETV / IBahn / Magilink / Otrum / Siemens / Amino / MDC / Enseo
•
Standalone
: OFF / Movielink / Swisscom / SSCP
SI Config
MDC ID Settings
This function is only available when set to
Hospitality Mode
:
Interactive
,
SI Vender
:
MDC
.
TV Version
This function is only available when set to
Hospitality Mode
:
Interactive
,
SI Vender
:
Magilink
.
Power On
Power On Channel
Set the channel to display when the TV is turned on.
•
User Defined
: Lets you set the channel number manually on
Power On Channel
Num
. See
Power On Channel Num
below.
•
Last Saved
: If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel Num
When the TV is turned on, it switches automatically to this channel.
Power On Channel Type
Select the type of the channel will be displayed when the TV is turned on.
ATV
(analog air band),
DTV
(digital air band),
CATV
(analog cable band),
CDTV
(digital
cable band),
SDTV
(For Satellite Models),
IPTV
(IP channel,
IPTV
is set when deployed
from solution.)
Power On Volume
Set volume level when the TV is turned on.
•
User Defined
: Lets you set volume level manually.
•
Last Saved
: When the TV is turned on, it returns to the volume that had been set
when the power had been turned off.
Power On Volume Num
The TV turns on with set volume level in
Standalone
mode.
Min Volume
The minimum volume level the user can set in
Standalone
mode.
Max Volume
The maximum volume level the user can set in
Standalone
mode.
Power On Source
Select the input source to be displayed when the TV is turned on.
Power On Option
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
•
Power ON
: When the power returns, the TV turns on.
•
Standby
: When the power returns, the TV enters the standby mode.
•
Last Option
: Returns to its last power state. If it was in standby mode, it returns to
standby mode. If it was on, it turns on.
English - 30