Pairing the TV to the Samsung Smart Remote
When you turn on the TV for the first time, the Samsung Smart Remote pairs to the TV
automatically. If the Samsung Smart Remote does not pair to the TV automatically,
point it at the remote control sensor of the TV, and then press and hold the buttons
labelled and
as shown in the figure on the left simultaneously for 3 seconds or
more.
Charging the battery
Solar Cell
Expose to light when the remote is not in use. This will extend the remote's
operating time.
USB port (C-type) for charging
Used for quick charging. The LED on the front will light when charging. When
the battery is fully charged, the LED will turn off.
•
The USB Cable is not provided.
– It is recommended to use an original Samsung charger. Otherwise, it may cause performance degradation or failure
of the product. In this case, the warranty service is not applicable.
– When the remote control does not work due to low battery, charge it by using the USB-C type port.
– Battery consumption may differ depending on the usage environment.
Fire or explosion may occur, resulting in damage to the remote control or personal injury.
• Do not apply shock to the remote control.
•
Be careful not to let foreign substances such as metal, liquid, or dust come in contact with the charging
terminal of the remote control.
•
When the remote control is damaged or you smell smoke or burning fumes, immediately stop
operation and then repair it at the Samsung service centre.
• Do not arbitrarily disassemble the remote control.
•
Be careful not to let infants or pets suck or bite the remote control. Fire or explosion may occur,
resulting in damage to the remote control or personal injury.
English - 13
