ENGLISH
CZECH
56
PÞehr‡v‡n’ z‡znamu
Playing back the Tape
DSE in PLAYER mode
✤
The procedure for using DSE in PLAYER mode is the same as the
procedure for using DSE in CAMERA mode, except that the power
switch must be set to PLAYER instead of CAMERA.
Please refer to pages 40 and 41.
Note:
The GHOST, STROBE, NEG., MIRROR, MOSAIC, CINEMA
and WIDE(16:9) effects will not operate when your camcorder is
in PLAYER mode.
✤
Pressing the DSE button will scroll through the available settings.
Stop at the one you require.
Maintenance
Cleaning and Careing for your Camcorder
Cleaning the Viewfinder
◆
Releasing the Eyepiece
1. Pull the VIEWFINDER up and turn the screw
counter-clock-wise.
2. Pull the eyepiece away from the viewfinder.
3. Clean the Eyepiece and the VIEWFINDER-
screen with a soft cloth and cotton swab or
a blower.
◆
Reattaching the Eyepiece
4.
Replace the Eyepiece on the VIEWFINDER.
5.
Replace and tighten the screw.
Cleaning the LCD panel
Open the LCD display panel and wipe it gently with a soft cloth.
Be careful not to damage the display.
DSE v reìimu PLAYER
✤
PouÏití DSE v reÏimu PLAYER je stejné jako pouÏití v reÏimu
CAMERA - viz str. 40 - 41, pouze funkãní pfiepínaã musí b˘t
nastaven na reÏim PLAYER, nikoli CAMERA.
Poznámka:
Funkce
GHOST, STROBE, NEG., MIRROR, MOSAIC,
CINEMA
a
WIDE(16:9)
reÏimu DSE nebudou v reÏimu
PLAYER pracovat.
✤
Tisknutím tlaãítka DSE budete rolovat mezi dostupn˘mi nastaveními.
Zastavte na tom nastavení, které poÏadujete.
òdrìba
‰iätžn’ a œdrìba videorekordŽru
âi‰tûní hledáãku
◆
DemontáÏ oãnice hledáãku
1. Zvednûte hledáãek a potom jím otoãte proti
smûru hodinov˘ch ruãiãek.
2. Sejmûte oãnici hledáãku.
3. Vyãistûte oãnici a matnici hledáãku jemn˘m
hadfiíkem, ‰tûteãkem nebo vyfoukáním.
◆
Zpûtná montáÏ oãnice hledáãku
4. PfiiloÏte oãnici na hledáãek.
5. Na‰roubujte ji zpût.
âi‰tûní LCD panelu
Otevfiete LCD panel a utfiete jemn˘m hadfiíkem monitor.
Postupujte opatrnû, aby nedo‰lo k po‰kození displeje.
All manuals and user guides at all-guides.com
all-guides.com
