English - 82
Setting Up
The following settings are to use functions.
To use the Function, (HDMI-CEC) must be set to On
1
Press the
MENU
button.
Press the ▲ or ▼ button to select
Setup
, then press the
ENTER
button.
2
Press the ▲ or ▼ button to select
(HDMI-CEC)
, then press the
ENTER
button.
3
Press the
ENTER
button to select
(HDMI-CEC)
, then press the
ENTER
button.
4
Press the ▲ or ▼ button to select
On
, then press the
ENTER
button.
➢
The function is enabled.
➢
If you select
Off
, is disabled.
➢
When the (HDMI-CEC) function is disabled, all the related
operations are deactivated.
Setting an Device to turn Off Automatically when the TV is Turned Off
3
Press the ▲ or ▼ button to select
Auto Turn Off
, then press the
ENTER
button.
4
Press the ▲ or ▼ button to select
On
, then press the
ENTER
button.
➢
The Auto turn off function is enabled.
➢
If you select
Off
, the Auto turn off function is canceled.
Press the
EXIT
button to exit.
➢
The Select Device setting of the TV remote control is to be set to TV to use the function.
➢
If you set the (HDMI-CEC) to On, the Device List menu appears when you press the
TOOLS
button on the remote control.
➢
If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off.
However, if the device is recording, it may not be turned off.
Scanning and Switching between Devices
1
Press the
Anynet
+ button.
Press the
ENTER
button to select
Device List
.
➢
devices connected with the TV are listed.
➢
If you cannot find a device you want, press the red button to scan for devices.
2
Press the ▲ or ▼ button to select to a particular device and press the
ENTER
button.
It is switched to the selected device.
➢
Only when you set (HDMI-CEC) to On in the Setup menu, the Device List menu
appears.
➢
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation
during the switching operation.
➢
The time required to scan for devices is determined by the number of connected devices.
➢
When the device scan is complete, the number of found devices is not displayed.
➢
Although the TV automatically scans devices when it is turned on using the
POWER
button, devices connected when the TV is
already on are not displayed in the device list. Therefore press the red button to re-scan devices if necessary.
➢
If you have selected external AV device by pressing the
SOURCE
button, you cannot use the function. Make sure to
switch to an device by using the
button.
Continued...
Setup
Melody
: Medium
Bluetooth
(HDMI-CEC)
▶
SW Upgrade
Function Help
: On
(HDMI-CEC) Setup
(HDMI-CEC) : ON
Auto Turn Off
:
Return
Enter
Off
On
Move
(HDMI-CEC) Setup
(HDMI-CEC) : On
Auto Turn Off
:
Return
Enter
Off
On
Move
Device List
Headset Connection
Picture Setting
Sound Setting
Sleep Timer Off
Caption Off
Channel Add/Delete
Delete Favorite Channel
▼
Move
Enter
BP68-00628B-00Eng_5.indd 82
2007-03-02 ｿﾀﾈﾄ 4:26:20
