English - 18
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
1
Press the
POWER
button on the remote control.
The message
Menu language, Shop Mode, Channels and Time will be set.
is
automatically displayed.
Press the
ENTER
button, then the message
Select the language of the OSD.
is
displayed.
2
Press the ◄ or ► button to select a language, then press the
ENTER
button.
3
Press the ◄ or ► button to select
Shop
or
Home
, then press the
ENTER
button.
➢
The default selection is
Home
.
➢
We recommend setting the TV to Home mode for the best picture in your home
environment.
➢
Shop mode is only intended for use in retail environments.
➢
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home)
mode, press the Volume button and then hold down the
MENU
button for five seconds
on the TV panel.
4
Press the ◄ or ► button to memorize the channels of the selected connection, then press
the
ENTER
button.
➢
If the antenna is connected to ANT 1 IN (CABLE), select
Cable
and if it is connected
to ANT 2 IN (AIR), select
Air
.
➢
If both ANT 1 IN (CABLE) and ANT 2 IN (AIR) are connected, select the
Air+Cable
.
➢
In Cable mode, you can select the correct analog signal source among
STD
,
HRC
,
and
IRC
by pressing the ◄ or ► button, then press the
ENTER
button. If you have
Digital cable, select the signal source for both
Analog
and
Digital
.
Contact your local cable company to identify the type of cable system that exists in
your particular area.
5
The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the
ENTER
button when channel memorization is complete.
The message
Set the Clock Mode.
is displayed.
➢
To stop the search before it has finished, press the
ENTER
button with stop selected.
6
Press the ◄ or ► button to select
Manual
for setting the current time manually, then press
the
ENTER
button. The message
Enter the current date and time.
is displayed.
➢
If you select
Auto
,
Set to daylight saving time.
is displayed, then go to step
9
.
(If you want to set the time automatically, skip to step
9
.)
7
Press the ◄ or ► button to move to
Month
,
Day
,
Year
,
Hour
, or
Min
.
Set the date and time you want by pressing the ▲ or ▼ button, then press the
ENTER
button.
➢
You can set the month, day, year, hour, and minute directly by pressing the number
buttons on the remote control.
8
The message
Enjoy your watching.
is displayed.
When you have finished, press the
ENTER
button.
➢
Even if the
ENTER
button is not pressed, the message will automatically disappear
after several seconds.
Continued...
Plug & Play
Select the antennas to memorize
Air
Cable
Air+Cable
Enter
Skip
Plug & Play
Auto Program in Progress.
Cable 3
10%
Stop
Enter
Skip
Plug & Play
Selects the cable system.
Analog
Digital
STD
HRC
IRC
STD
HRC
IRC
Enter
Skip
Plug & Play
Set the Clock Mode.
Auto
Manual
Enter
Skip
Plug & Play
Enjoy your watching.
OK
Plug & Play
Select the language of the OSD.
English
Español
Français
Enter
Skip
Plug & Play
Select Home Mode when installing this TV at
home.
Shop
Home
Enter
Skip
Plug & Play
Enter the current date and time.
Enter
Skip
Month / Day / Year
Hour / Min
--
/
--
/
----
-- : -- --
▲
▼
Adjust
Plug & Play
Menu language, Shop Mode, Channels and Time
will be set.
Start
Enter
Exit
BN68-00630D-Eng_1.indd 18
2007-04-09 ｿﾀﾈﾄ 6:50:53
