Your headset supports the Simple Pairing feature which allows the headset to be
paired with a Bluetooth device without requesting a PIN. This feature is available
for devices that are compliant with Bluetooth version 2.1 or higher.
Active Pairing
With the Active pairing feature, your headset automatically looks for a Bluetooth device
within range and tries to make a connection with it.
Make sure the phone’s Bluetooth visibility option is set on.
•
In Pairing mode, press and hold the Talk button on the headset. The indicator light
color changes to violet from blue. The headset will attempt active paring for up to
20 seconds.
•
The Bluetooth phone you want to connect with must not be paired with other
devices. If the phone is already connected to another device, end the connection
and restart the Active pairing feature.
•
This feature may not be supported on some devices.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected with two
Bluetooth phones at the same time.
To turn Multi-point feature on
In Pairing mode, press and hold the
Volume up button. The blue indicator
light flashes twice.
To turn Multi-point feature off
In Pairing mode, press and hold the
Volume down button. The red indicator
light flashes twice.
1
After connecting with the first Bluetooth phone, enter Pairing mode again.
2
Activate the Bluetooth feature on the second Bluetooth phone and search for the headset
(see your phone’s user manual).
