66
using with a Windows computer
Make sure you insert the USB plug into the USB port with the plug facing in the correct direction.
When the built-in USB plug is connected, turning the camcorder on or off may cause the PC to
malfunction.
If you disconnect the camcorder’s built-in USB plug from the PC while transferring fi les, the data
transmission will stop and the data may be damaged.
If you connect the built-in USB plug to a PC via a USB HUB or simultaneously connect the built-
in USB plug along with other USB devices, the camcorder may not work properly. If this occurs,
remove all USB devices from the PC, and then reconnect the camcorder.
Intelli-studio may not automatically run. If this occurs, access My Computer or Windows Explorer,
open the drive that corresponds to your camcorder, fi nd Intelli-studio, and then run IStudio.exe.
The camcorder is turned off when its USB plug is departed from the USB port of the computer.
•
•
•
•
•
•
USING THE Intelli-studio PROGRAMME
Using the Intelli-studio programme built into your camcorder,
you can transfer video and photo fi les to your PC and
edit them on your PC screen. Intelli-studio offers the most
convenient way for you to manage your video
and photo fi les.
Step 1. Connecting the USB plug
1.
Set “
PC Software: On
.”
¬
page 61
This is the default setting.
2.
Connect the built-in USB plug of the camcorder to the USB port
of the PC.
A new fi le saving window appears along with the Intelli-studio
main window.
Depending on your version of Windows, the removable disk
window also appears.
3.
Click “
Yes
” in the fi le saving window. The uploading procedure
starts. Click “
Yes
” to confi rm.
If you do not want to save new fi les, select “
No.
”
•
•
•
•
To disconnect the USB plug after completing the fi le transfer, you must follow these steps:
1.
Click the “
Safely Remove Hardware icon
” on the taskbar.
2.
Select “
USB Mass Storage Device,
” and then click “
Stop.
”
3.
If the “
Stop a Hardware device
” window appears, click “
OK.
”
4.
Disconnect the camcorder’s built-in USB plug from the PC.
MENU
Settings
Format
Auto Power Off
PC Software
Default Set