61
Make sure you insert the USB plug into the USB jack with the plug facing in the correct direction.
Use the AC power adaptor to power the camcorder when transferring files to your computer.
When the built-in USB plug is connected, turning the camcorder on or off may cause the PC to
malfunction.
If you disconnect the built-in USB plug from the PC or the camcorder while transferring files, the
data transmission will stop and the data may be damaged.
If you connect the built-in USB plug to a PC via a USB HUB or simultaneously connect the built-
in USB plug along with other USB devices, the camcorder may not work properly. If this occurs,
remove all USB devices from the PC and reconnect the camcorder.
Intelli-studio may not automatically run. If this occurs, access My Computer or Windows Explorer,
open the drive that corresponds to your camcorder, find Intelli-studio, and then run IStudio.exe.
•
•
•
•
•
•
USING THE Intelli-studio PROGRAM
Using the Intelli-studio program built into your
camcorder, you can transfer video and photo
files to your PC and edit them on your PC screen.
Intelli-studio offers the most convenient way for
you to manage your video and photo files.
Step 1. Connecting the USB plug
1.
Set “
PC Software: On
.”
page 57
This is the default setting.
2.
Connect the built-in USB plug of the camcorder to the USB port
of the PC.
A new file saving screen appears with the Intelli-studio main
window.
Depending on your version of Windows, the removable disk
window also appears.
3.
Click “
Yes.
” The uploading procedure starts. Click “
Yes
” to
confirm.
If you do not want to save a new file, select “
No.
”
To disconnect the USB plug.
To disconnect the USB plug after completing the file transfer, you must follow these steps:
1.
Click the “
Safely Remove Hardware icon
” icon on the taskbar.
2.
Select “
USB Mass Storage Device,
” and then click “
Stop.
”
3.
If the “
Stop a Hardware device
” window appears, click “
OK.
”
4.
Disconnect the camcorder’s built-in USB plug from the PC.
•
•
•
•
Settings
Default Set
PC Software
TV Display
Menu
Exit
Move
Off
On