18
Note:
The default connection state for the HotSpot is secured.
Use the Web portal to configure the various settings.
Configuring Your HotSpot
Changing your Web Portal Administrator
Password
Changing this password prevents other users from entering
the default “admin” password and gaining access to your
Web portal and changing the device’s settings.
1.
Access the Web portal and select the
Configuration
➔
Tools
tab.
2.
Select the
New Password
field and enter your updated
password information.
3.
Re-enter your new password within the
Verify New
Password
field.
Caution!
Write down this new administrator password. If you
loose or forget it, you will need to do a Factory Reset
on the device to regain access. For more information,
refer to
“Factory Reset of Your Device”
on page 12.
4.
Click
Apply
.
Changing your Wi-Fi Access Password
This password is different from the administrator password
that provides access to the Web portal. The Wi-Fi password
is used by external devices to gain a connection to the
HotSpot.
1.
Access the Web portal and select
Network
.
2.
From the bottom of the screen, tap the
Password
field,
and enter your new password.
3.
Click
Apply
. Any currently connected devices will need
to update their connection passwords.
Changing your SSID Name
1.
Access the Web portal and select
Network
.
2.
Select the
Network Name (SSID)
field.
3.
Delete the current information and enter a new name.
4.
Click
Apply
. Any currently connected devices will need
to forget their previous connections and reconnect to
the newly named HotSpot.
