Configuring Your Device 39
DLNA Tab
This tab provides you with the ability to designate your
HotSpot or a DLNA-compliant device that can share stored
information with other compliant devices.
This feature works by sharing data stored within an internally
installed microSD memory card. For more information, refer
to
“Installing the Optional microSD Memory Card”
on page
9.
To set up the DLNA settings:
1.
Access the Web portal and select
Configuration
➔
DLNA
tab.
2.
Select the
Device Name
filed, enter a unique name for
your DLNA device, and tap
Apply
. This is the name that
will display on external DLNA-compliant devices.
3.
From the
Select media
section, place a checkmark
alongside those file types (located on your microSD
card) you wish to share with external devices. Choose
from: Music, Pictures, and Videos.
4.
Select either
Apply
or
Reset
.
DLNA Buttons
•
Apply
: Select to save changes made to the list.
•
Reset
: Select to discard changes made to the list.
Tools Tab
This tab provides access to Web portal features such as
Administrator password reset, Power Management, System
Log files, and Device Factory Reset.
Change Administration Password
This password protects the configuration settings on this
device. You must provide the password to access the
HotSpot’s Web-based administration interface.
•
New Password
: Enter the new password you would like to used
to access the administration interface.
Enter the new password, using only letters, numbers, and
standard punctuation symbols. The password must be at least
four characters long. The maximum length is 64 characters.
•
Verify New Password
: Re-enter the new password to verify and
select
Apply
.
