Alignment and Adjustments
Samsung Electronics
2-1
2. Alignment and Adjustments
2-1 Service Mode
2-1-1 SERVICE MODE Entry Method (General Transmitter)
■
Using the Customer Remote
1. Turn the power off and set to stand-by mode.
2. Press the remote bottons in this order; POWER OFF-MUTE-1-8-2- POWER ON to turn the set on.
3. The set turns on and enters service mode.
* If you fail to enter service mode, repeat steps 1 and 2 above.
2-1-2 Initial SERVICE MODE DISPLAY State
2-1-2(A) OSD DISPLAY
2-1-2(B) Button Operations in SERVICE MODE
♣
♣
While in Tuner mode, the direct access buttons can be used to select and change channels.
☞
Indicates selected input mode
☞
Picture Adjustment
☞
Setting the Initial Values
☞
Setting the Special Features
☞
Options-1 : Particular Product Options
☞
Options-2 : PDP Properties Options
☞
Initializing after saving the adjustments
☞
Software Version Information
Factory Mode
Current Input Mode
01. Picture Improvement
√
02. Initial Setting
√
03. PIP/Test Pattern
√
04. Option-1
√
05. Option-2
√
06. Reset
√
Release : 2004-03-30-14:00
Version : T_MOZ42NUS_0011
Menu
Displays all menus
UP/DOWN
Cursor moves to select items
LEFT/RIGHT
To increase and decrease the data of the selected items
(ENTER)
Confirm your choice(Store OR Enter)
TV/VIDEO button
Change input source
Summary of Contents for HPP4261X/XAA
Page 4: ...1 2 Samsung Electronics MEMO...
Page 25: ...4 2 Samsung Electronics MEMO...
