1) Input Toshiba Pattern (#16) to Video Input.
2) Select 04. Option-1 -> 10. Video Port.
3) Set 10. Video Port equal to Video.
4) At Main SVC Menu, select 01. Picture Improvement -> 01. White Balance.
5) Adjust Items 01 - 08 as performed in DVI mode.
6) Return to Main SVC menu and select 04. Option-1 -> 10. Video Port.
7) Set 10. Video Port equal to Graphic.
8) At Main SVC Menu, select 01. Picture Improvement -> 01. White Balance.
9) Adjust Items 01 -> 08 as performed in DVI Mode.
* Thus, Micom saves the W/B data separately for each memory mode of the block (See the block diagram given below) during
W/B adjustment.
Alignment and Adjustments
Samsung Electronics
2-3
PC
(A-RGB)
DVI
(D-RGB)
VSP9437
FLI2310
V-PEAKING
Y-Delay
C-Delay
Brightness
Contrast
Saturation
RF
VIDEO
RGB
RGB
Scaler
RGB/YUV
CONTRAST
BRIGHT
ASI510
RGB-cont
RGB-bri
R-gamma
G-gamma
B-gamma
DNIe
Bri-offset
Con-offset
Different adjustment values will be applied
to DVI, PC ,DTV(Component) and Video mode.
Adjustment
Reg
Memory
Mode
- DVI
- PC
- Video
- Component(DTV)
Y/R-gain
Cr/B-gain
Cb/G-gain
Y/R-offset
Cr/b-offset
Cb/G-offset
Adjustment
Reg
Memory
Mode
Analog PC
- Auto Color
value(RGB)
DTV Mode
Logic
SIL169
SW
IC
S/W
R-dri
G-dri
B-dri
R-cutoff
G-cutoff
B-cutoff
Adjustment
Reg
AD9883
CXA2151
YPbPr
DTV
COMP1,2
Graphic
Port
Memory
Mode
- DVI
- PC
- Video
- Component(DTV)
Video
Port
Summary of Contents for HPP4261X/XAA
Page 4: ...1 2 Samsung Electronics MEMO...
Page 25: ...4 2 Samsung Electronics MEMO...
